No overselling, no guesswork — just a Hvac Installation crew that diagnoses it right the first time. Emergency dispatch available across Dane and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
You'll get a flat-rate quote before any repair work begins — no guessing what the final bill will look like.
Warranty details are explained clearly so you know exactly what's covered going forward.
Leonard HVAC grew one honest service call at a time in communities like Dane. Every technician we send to your door is background-checked, factory-trained, and licensed to work on the systems installed throughout Dane, WI.
We're not the biggest name in Dane — we're the company that tells you what actually needs fixing instead of what pads the ticket. We carry the credentials Dane inspectors and property managers expect to see, and we keep that documentation available on request for every job, routine or emergency.
We know which neighborhoods run on older ductwork and which subdivisions were built with newer high-efficiency systems. That local knowledge shapes the maintenance schedules we recommend — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Too many homeowners in Dane have a story about a tech who showed up late, quoted one price, and charged another. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Dane is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Dane rooftop unit. We keep parts inventory stocked based on what actually fails most often on Dane's housing stock.
Whether it's a mid-summer breakdown or a planned system replacement, our Dane techs handle it with the same level of care.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Dane dispatch team sends the closest available truck first so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
An aging system that's constantly breaking down usually costs more to keep patching than to replace. We walk Dane homeowners through efficiency ratings and how they translate into real monthly savings before a single piece of equipment gets ordered.
Most installs in Dane are completed in a single day, and we walk you through the new thermostat and any app controls before we leave.
A retail floor, a restaurant kitchen, or an office suite can't run without stable climate control. Our commercial division services multi-zone commercial buildouts across Dane, with service agreements built around your operating hours.
Property managers working with multiple Dane locations can set up a standing account so every site gets consistent service history and pricing.
A seasonal tune-up catches the kind of wear that turns into a mid-summer no-cool call. Beyond standard tune-ups, we also handle indoor air quality upgrades for homes with allergy or asthma concerns for Dane households that want more than just temperature control.
We'll show you photos of anything concerning we find, along with a plain-language explanation of what it means and whether it's urgent.
We'd rather set clear expectations upfront than make vague promises we can't back up.
Every repair comes with a workmanship warranty explained in plain terms before we leave.
Emergency dispatch never comes with a hidden surcharge sprung on you after the fact.
If anything feels off after we leave, one call gets a tech back to your Dane address.
A little attention to how your system is running can save you a lot of money and discomfort.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
If some rooms stay hot or cold no matter what the thermostat says, the system may be struggling to distribute air evenly.
A system working harder than it should to hit the same temperature shows up directly on your utility bill.
Short cycling puts extra wear on the compressor and shortens the system's overall lifespan.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
Repeated repairs on an aging system are usually the clearest sign that replacement will save more money than another patch job.
No inflated "emergency surcharge" games — the number we quote is the number you pay.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
Parts and labor are backed by warranty terms explained in plain language.
Every technician carries current state licensing and manufacturer training.
You make the final call — we just make sure you have the full picture.
We'll walk you through what's actually available before you decide.
A snapshot of the feedback that keeps us accountable.
"Our AC quit on the hottest weekend of the year and they had a tech out within a couple of hours. The pricing was exactly what they quoted over the phone."
"We've used them for our maintenance plan for two years now and never had a surprise breakdown. Techs are always polite, always on time, and clean up after themselves."
"They handled the whole install in a single day, exactly like they said they would. Followed up a week later just to check everything was still running fine."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Kept our kitchen running through the weekend rush."
"The estimate matched the final invoice exactly, down to the dollar. My energy bill dropped noticeably the first month with the new system."
"Diagnosed a failed capacitor and had it swapped within the hour. This is the company I'm saving in my phone now."
Understanding what typically fails helps homeowners know what to watch for and when a repair call is worth making before things get worse.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Before the heaviest cooling months hit, it's worth having the refrigerant charge checked, the condenser coils cleaned, and the filter replaced — all of which directly affect how hard the compressor has to work.
Clearing debris, leaves, and overgrown landscaping away from an outdoor condenser unit gives it room to breathe and keeps it running efficiently. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Whether your Dane home has a traditional split system, a ductless mini-split, a heat pump, or a hybrid dual-fuel setup, our crews are equipped to diagnose and repair it. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Every tech on our Dane roster goes through background checks, licensing verification, and ongoing manufacturer training.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Runs point on overnight and weekend emergency calls throughout Dane.
Experienced with the light industrial and retail equipment common across the area.
Because our trucks are staged near Dane, average arrival windows run faster than what national chains typically offer.
We explain the diagnostic fee upfront and provide a flat-rate repair quote once the issue is identified.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
Our technicians walk you through the actual numbers — repair cost versus remaining system life versus new equipment efficiency — before making a recommendation.
Plan members typically see fewer surprise breakdowns because small issues get caught during routine visits.
Our dispatch area extends throughout the greater Dane region and nearby towns within Dane, WI.
Property managers and business owners can request a dedicated point of contact for ongoing service.
If parts require special ordering for a less common brand, we'll communicate that timeline upfront.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
Beyond basic safety checks, it's best to leave diagnosis to a licensed technician rather than attempting a repair yourself.
Ask about current after-hours rates when you call +1-866-805-8548.
Straightforward fixes like a capacitor swap or a thermostat replacement are often finished in well under an hour.
For most residential visits, yes, an adult should be present to grant access and approve any quoted work.
Housing stock varies a lot across Dane — older homes often still run original ductwork that needs different care than the sealed, high-efficiency systems going into newer builds.
If you manage several units or a shared system across a Dane property, ask about setting up a standing service account so every request gets handled under one consistent agreement.
Qualifying installations can be financed through options we'll walk you through during your in-home estimate, with terms explained clearly before you commit to anything. If a rebate or local incentive program applies to your Dane installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
If your address falls within Dane, WI and near Dane, there's a strong chance we already service your street.
If you're on the edge of our listed zip codes, it's still worth a call, since routes and coverage get adjusted as demand shifts.
